Garden and outdoor goods often sit at the intersection of two heavily layered tariff regimes: plastics and resins (HTS chapter 39) and iron and steel articles (HTS chapter 73), both of which can draw additional duties on top of the base rate. A patio set, planter, or hose reel that landed cheaply two years ago may now carry a much higher all-in rate once steel-derivative and country-specific actions are applied, though how much higher depends on the exact HS code, the country of origin, and which actions are in force. Because this category is bulky, low-margin, and largely imported, that increase tends to eat directly into per-unit profit rather than getting absorbed in volume.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
Indonesian goods enter the United States under the current reciprocal-tariff framework, which a recently signed US-Indonesia trade arrangement is still in the process of implementing. In broad terms that generally means a reciprocal duty layered on top of the normal tariff classification, while the arrangement is also expected to open reduced or zero treatment for certain qualifying originating goods and a defined volume of textiles and apparel, with several details still being finalized. For a Shopify merchant, the practical takeaway is that Indonesia is a reciprocal-era origin: it is not duty-free, but it is also not among the most heavily treated sources, so the landed-cost picture depends heavily on your specific product. Because that impact turns on whether your item falls inside any reduced-rate treatment, and because the applicable rate depends on the exact HS code, the duty line shown here should be treated as a representative starting point rather than a guarantee for every classification.
Indonesia is a credible China alternative for the right categories rather than a universal one. It has a genuinely diversified manufacturing base, with established capacity in areas such as apparel and textiles, footwear, furniture and wood products, rubber goods, and agricultural commodities, so for those lines you can often move volume without rebuilding your supply chain from scratch. The catch is that the reciprocal duty is a real cost, not a loophole, so the win comes from competitive factory pricing alongside whatever reciprocal treatment applies, not from escaping tariffs entirely. Any reduced or zero-rate treatment under the trade arrangement is generally conditional: it depends on the goods qualifying under rules of origin, and routing Chinese-made components through an Indonesian shipper does not by itself make them Indonesian-origin. Before you commit, confirm your category is something Indonesia actually makes at scale and price, and consider validating origin and classification with a qualified customs professional rather than assuming the headline rate applies to your SKU. This is general guidance, not customs or legal advice.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current Indonesia tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $65 patio set from Indonesia at a 14% stacked rate, that means charging $61.75 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
Duty here is driven less by the base rate (in the low-single-digit MFN range for this category, with the representative figure shown in the rate box) and more by what the item is physically made of and where it ships from. Steel-framed furniture, fencing, brackets, and fasteners generally classify under chapter 73 and can be exposed to Section 232 steel-derivative duties, while resin and plastic items such as planters, outdoor storage, hoses, and plastic-bodied garden tools generally classify under chapter 39 and may pick up country-specific Section 301 and other layers depending on origin. The attributes that tend to move the rate are the dominant material by weight or value, whether a metal component is treated as steel-derivative, the article's specific function, and the country of origin used for China and other targeted-country actions. Two outdoor products that look identical on a product page can carry very different all-in rates because one has a steel frame and the other is all-aluminum or all-resin. The exact rate still depends on the specific 10-digit HS code and the actions currently in effect.
A common pitfall for this category is classifying a mixed-material outdoor set under one "convenience" code for the whole kit instead of by the component that governs. A cushioned steel-frame patio set is not necessarily one classification covering the textile cushions, the resin side table, and the powder-coated steel frame; for mixed-material kits like this, classification generally turns on which component gives the set its essential character (a concept reflected in the General Rules of Interpretation), and the controlling heading depends on how the specific SKU is built. Merchants often default the full set to a furniture or plastics heading and may miss that a steel frame can pull it into chapter 73 with steel-derivative exposure, which can quietly understate landed cost. Because the exact 10-digit code depends on how the SKU is constructed, it is worth classifying by the dominant structural material rather than by how the product is marketed, and confirming borderline cases with a customs professional.
Because most of this category's added duty tends to come from country-specific steel and China actions rather than the base rate, shifting origin can move the number meaningfully, but only if the change is real. Substantial transformation matters: simply assembling Chinese-made steel frames in a third country generally does not change the origin for Section 301 purposes, and steel-derivative duties may follow the steel's melt-and-pour origin regardless of where assembly happens. The more durable mitigations for outdoor goods include choosing all-aluminum or all-resin versions where the design allows (which can sidestep the steel-derivative layer entirely), consolidating to fewer high-volume SKUs so tariff engineering is worth the effort, and confirming the supplier's true country of melt and origin in writing rather than relying on the shipping origin printed on the invoice. For specific shipments, confirm the exact HS code and origin treatment with a customs professional.
Why did the duty on my patio furniture jump even though the base rate is still low?
The base MFN rate on these goods is in the low single digits, but steel-framed outdoor furniture generally sits in HTS chapter 73 and can pick up Section 232 steel-derivative duties on top of that base. If the steel originates in or is sourced from a targeted country, additional Section 301 or other layers may stack as well. It is the all-in rate, not the base rate, that hits your margin, and how high it lands depends on the exact HS code, the country of origin, and the actions currently in force.
Is my resin planter taxed differently than my steel plant stand?
Often yes. Resin and plastic outdoor items generally classify under chapter 39 and may draw plastics-specific country actions, while steel stands, frames, and brackets generally classify under chapter 73 and can be exposed to steel-derivative duties. Same product family and same shelf, but different chapters and potentially different stacked rates. That is why two visually similar SKUs in your catalog can have very different landed costs, and why it helps to price and forecast them separately based on each item's actual HS code.
Can I avoid the steel tariffs by having my outdoor furniture assembled in another country?
Usually not on its own. For origin purposes what matters is substantial transformation, and bolting together steel frames that were melted and poured in a targeted country generally does not change the tariff origin. Steel-derivative duties may follow the steel's actual origin regardless of where final assembly happens. A more reliable path is sourcing genuinely different construction, such as an all-aluminum or all-resin version, or confirming the supplier's melt-and-pour origin in writing before you commit. For a specific shipment, confirm the HS code and origin treatment with a customs professional.
Is sourcing from Indonesia cheaper than China after tariffs?
It can be, but it depends on your category and your product's classification. Indonesia carries its own reciprocal duty, so the comparison is the Indonesian rate plus factory pricing versus the China rate plus its pricing, landed and all-in. For categories Indonesia tends to produce competitively, such as apparel, footwear, furniture, and rubber goods, the combined number can come out lower, though that is not guaranteed. Run the full landed-cost math on your specific SKU rather than assuming a blanket win, and note that the duty figure shown here is a representative rate and that the rate that actually applies depends on the exact HS code. This is general guidance, not customs or legal advice.
Do Indonesian goods qualify for zero or reduced US tariffs?
Some may. The recently signed US-Indonesia trade arrangement is expected to provide reduced or zero reciprocal treatment for certain qualifying originating Indonesian goods and a defined volume of textiles and apparel, but that treatment is not automatic for everything shipped from Indonesia, and parts of it are still being implemented. Eligibility generally turns on rules of origin, meaning the product has to be genuinely made in Indonesia, and on whether your category and exact HS code sit inside the applicable schedule. It is worth confirming both your tariff classification and origin status with a qualified customs professional before counting on a reduced rate. This is general guidance, not customs or legal advice.
Can I avoid tariffs by routing China-made products through Indonesia?
Generally no. Simply shipping or transshipping Chinese-made goods through an Indonesian port does not by itself change their country of origin, and that practice can be treated as a customs violation. To claim Indonesian origin, the goods typically have to undergo substantial transformation in Indonesia under the applicable rules of origin, not just final packing or a paperwork change. Misrepresenting origin can carry penalties that go well beyond the duty itself, so genuine local manufacturing, rather than relabeling, is the safer path. This is general guidance, not customs or legal advice.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →