Garden and outdoor goods often sit at the intersection of two heavily layered tariff regimes: plastics and resins (HTS chapter 39) and iron and steel articles (HTS chapter 73), both of which can draw additional duties on top of the base rate. A patio set, planter, or hose reel that landed cheaply two years ago may now carry a much higher all-in rate once steel-derivative and country-specific actions are applied, though how much higher depends on the exact HS code, the country of origin, and which actions are in force. Because this category is bulky, low-margin, and largely imported, that increase tends to eat directly into per-unit profit rather than getting absorbed in volume.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
China is the highest-stacked common sourcing origin into the US, because duties tend to layer on top of one another rather than replacing each other. A China import can carry the normal HTS base rate, Section 301 tariffs that apply to many goods from China, and current reciprocal-era duties, and where they apply those layers can compound on the same customs value. The practical result is that the listed product duty rate often does not tell the whole story, and the gap between an order's invoice cost and its true landed cost can be wider for China than for many other origins. The combined rate depends on the exact HS code, so for margin planning that stacking is a leading reason a China-sourced SKU can look profitable on paper and still lose money after it clears customs.
China is often not the margin-safe choice on tariff exposure alone, since it carries one of the heaviest stacked-duty loads among the common origins, so the honest framing is that it tends to compete on unit cost, supplier depth, tooling, and speed rather than on landed-cost advantage. The catch with staying in China is duty volatility: Section 301 lists and reciprocal-era rates are set by policy and can change in ways you do not control, so a margin that works today can compress if rates move. The catch with leaving is that lower-tariff alternatives (for example in parts of Southeast Asia) often carry their own load, including higher per-unit pricing, longer qualification, thinner supplier networks, and closer review of whether goods are genuinely transformed there versus merely transshipped from China. Before assuming any alternative origin or trade program lowers your duty, confirm the product actually meets that country's rules of origin for its specific HS code, because qualifying is not automatic. A durable approach is to model total landed cost per SKU under each origin, keep a second qualified supplier outside China for your tariff-sensitive lines, and treat China's rate as something to monitor over time rather than set once. This is general guidance, not customs or legal advice.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current China tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $65 patio set from China at a 39% stacked rate, that means charging $75.29 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
Duty here is driven less by the base rate (in the low-single-digit MFN range for this category, with the representative figure shown in the rate box) and more by what the item is physically made of and where it ships from. Steel-framed furniture, fencing, brackets, and fasteners generally classify under chapter 73 and can be exposed to Section 232 steel-derivative duties, while resin and plastic items such as planters, outdoor storage, hoses, and plastic-bodied garden tools generally classify under chapter 39 and may pick up country-specific Section 301 and other layers depending on origin. The attributes that tend to move the rate are the dominant material by weight or value, whether a metal component is treated as steel-derivative, the article's specific function, and the country of origin used for China and other targeted-country actions. Two outdoor products that look identical on a product page can carry very different all-in rates because one has a steel frame and the other is all-aluminum or all-resin. The exact rate still depends on the specific 10-digit HS code and the actions currently in effect.
A common pitfall for this category is classifying a mixed-material outdoor set under one "convenience" code for the whole kit instead of by the component that governs. A cushioned steel-frame patio set is not necessarily one classification covering the textile cushions, the resin side table, and the powder-coated steel frame; for mixed-material kits like this, classification generally turns on which component gives the set its essential character (a concept reflected in the General Rules of Interpretation), and the controlling heading depends on how the specific SKU is built. Merchants often default the full set to a furniture or plastics heading and may miss that a steel frame can pull it into chapter 73 with steel-derivative exposure, which can quietly understate landed cost. Because the exact 10-digit code depends on how the SKU is constructed, it is worth classifying by the dominant structural material rather than by how the product is marketed, and confirming borderline cases with a customs professional.
Because most of this category's added duty tends to come from country-specific steel and China actions rather than the base rate, shifting origin can move the number meaningfully, but only if the change is real. Substantial transformation matters: simply assembling Chinese-made steel frames in a third country generally does not change the origin for Section 301 purposes, and steel-derivative duties may follow the steel's melt-and-pour origin regardless of where assembly happens. The more durable mitigations for outdoor goods include choosing all-aluminum or all-resin versions where the design allows (which can sidestep the steel-derivative layer entirely), consolidating to fewer high-volume SKUs so tariff engineering is worth the effort, and confirming the supplier's true country of melt and origin in writing rather than relying on the shipping origin printed on the invoice. For specific shipments, confirm the exact HS code and origin treatment with a customs professional.
Why did the duty on my patio furniture jump even though the base rate is still low?
The base MFN rate on these goods is in the low single digits, but steel-framed outdoor furniture generally sits in HTS chapter 73 and can pick up Section 232 steel-derivative duties on top of that base. If the steel originates in or is sourced from a targeted country, additional Section 301 or other layers may stack as well. It is the all-in rate, not the base rate, that hits your margin, and how high it lands depends on the exact HS code, the country of origin, and the actions currently in force.
Is my resin planter taxed differently than my steel plant stand?
Often yes. Resin and plastic outdoor items generally classify under chapter 39 and may draw plastics-specific country actions, while steel stands, frames, and brackets generally classify under chapter 73 and can be exposed to steel-derivative duties. Same product family and same shelf, but different chapters and potentially different stacked rates. That is why two visually similar SKUs in your catalog can have very different landed costs, and why it helps to price and forecast them separately based on each item's actual HS code.
Can I avoid the steel tariffs by having my outdoor furniture assembled in another country?
Usually not on its own. For origin purposes what matters is substantial transformation, and bolting together steel frames that were melted and poured in a targeted country generally does not change the tariff origin. Steel-derivative duties may follow the steel's actual origin regardless of where final assembly happens. A more reliable path is sourcing genuinely different construction, such as an all-aluminum or all-resin version, or confirming the supplier's melt-and-pour origin in writing before you commit. For a specific shipment, confirm the HS code and origin treatment with a customs professional.
Why is sourcing from China more expensive on duties than other countries?
Often because the duties stack. A China import can carry its normal HTS base rate, Section 301 tariffs that apply to many goods from China, and current reciprocal-era duties at the same time, and where they apply those layers can compound on the same customs value rather than replacing one another. That compounding is a key reason China is the highest-stacked common sourcing origin into the US, and it is why the product's listed duty rate can understate what you actually pay at the border. The combined rate depends on the exact HS code, so check the combined rate for your specific HTS classification rather than the headline figure.
Should I move my sourcing out of China to avoid the tariffs?
Maybe, but run the full landed-cost math first instead of assuming an alternative is cheaper. Lower-tariff origins often offset their duty advantage with higher unit prices, longer lead times, smaller supplier bases, and qualification work, so the all-in cost can land close to China for some products. A second consideration is rules of origin: goods generally get an alternative country's treatment only if they are substantially produced or transformed there, not simply routed through it, and that determination depends on the specific HS code. The right answer is usually SKU-by-SKU, and a safer position is a qualified backup supplier outside China for your most tariff-sensitive lines. This is general guidance, not customs or legal advice.
Could the tariffs on Chinese goods change again?
They could, and planning for that is part of sourcing from China carefully. Section 301 tariff lists and reciprocal-era duty rates are set by policy and can be adjusted in ways no merchant controls, which is part of why China-sourced margins can be more exposed to rate changes than some other origins. Treat your current China rate as a number to monitor rather than a fixed input, and revisit landed cost whenever rates shift. Because the live combined duty rate depends on your exact HS code, confirm it before committing to a large order, since the rate at quote time may not be the rate at arrival. This is general guidance, not customs or legal advice.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →