Furniture is unusually exposed in the current tariff era because it is bulky, low in value per pound, and largely sourced from a small group of Asian countries, most of which face recent rate actions. A bedframe or sofa carries little duty per cubic foot of shipping, so when a surcharge stacks onto an already freight-heavy product, the added cost tends to land disproportionately on your landed price. Wood furniture has been a recurring target of trade actions, which means a current stacked rate can sit on top of pre-existing antidumping orders rather than replacing them.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
China is the highest-stacked common sourcing origin into the US, because duties tend to layer on top of one another rather than replacing each other. A China import can carry the normal HTS base rate, Section 301 tariffs that apply to many goods from China, and current reciprocal-era duties, and where they apply those layers can compound on the same customs value. The practical result is that the listed product duty rate often does not tell the whole story, and the gap between an order's invoice cost and its true landed cost can be wider for China than for many other origins. The combined rate depends on the exact HS code, so for margin planning that stacking is a leading reason a China-sourced SKU can look profitable on paper and still lose money after it clears customs.
China is often not the margin-safe choice on tariff exposure alone, since it carries one of the heaviest stacked-duty loads among the common origins, so the honest framing is that it tends to compete on unit cost, supplier depth, tooling, and speed rather than on landed-cost advantage. The catch with staying in China is duty volatility: Section 301 lists and reciprocal-era rates are set by policy and can change in ways you do not control, so a margin that works today can compress if rates move. The catch with leaving is that lower-tariff alternatives (for example in parts of Southeast Asia) often carry their own load, including higher per-unit pricing, longer qualification, thinner supplier networks, and closer review of whether goods are genuinely transformed there versus merely transshipped from China. Before assuming any alternative origin or trade program lowers your duty, confirm the product actually meets that country's rules of origin for its specific HS code, because qualifying is not automatic. A durable approach is to model total landed cost per SKU under each origin, keep a second qualified supplier outside China for your tariff-sensitive lines, and treat China's rate as something to monitor over time rather than set once. This is general guidance, not customs or legal advice.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current China tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $250 chair from China at a 39% stacked rate, that means charging $289.58 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
Most finished furniture classifies under HTS chapter 94, where the heading turns mainly on use and material: seats (9401), other furniture such as tables, dressers, and bedframes (9403), and mattresses and bedding (9404) each carry different base treatment, and within those the material — wood, metal, plastic, or upholstered — can move the rate. The base MFN duty for the category is generally modest, but the duty that actually lands on your invoice is the country-of-origin load stacked on top, plus any product-specific antidumping or countervailing duty — for example the AD/CVD orders associated with wooden bedroom furniture and certain mattresses from specific countries — which in some cases can be much larger than the ordinary rate. Whether any such order reaches a given product, and the exact treatment, depends on the precise HS code and origin. Whether a piece is motorized, upholstered, or imported as a kit of parts versus fully assembled can also shift it into a different subheading with different treatment.
A common and costly mistake is treating every piece that holds your goods as one furniture line. Chapter 94 applies a use-and-form test: a seat generally classifies in 9401 even if it is a stool or bench, a storage cabinet generally goes in 9403, and some wall-mounted shelving or display units may fall outside chapter 94 depending on the specific article and its construction. A bigger trap is wooden bedroom furniture — dressers, nightstands, and headboards — which can fall under subheadings associated with antidumping orders; classifying such an item as generic "other wooden furniture" to sidestep that scope is the kind of call customs can reclassify on review, potentially with back duties. The precise subheading and whether an AD/CVD order reaches your SKU depend on the exact HS code and construction, so confirm it per product — ideally with a licensed customs broker — rather than applying one assumption across the whole catalog.
Furniture sourcing has shifted toward Vietnam and, increasingly, Thailand, India, and Cambodia, in part to move away from earlier China-specific actions — but a country switch only helps if it also clears any antidumping order that attaches to a specific product-and-origin pair, not just the headline tariff. Because furniture is assembly-heavy, substantial-transformation rules matter: shipping Chinese components to a third country for final assembly does not automatically change the country of origin for duty purposes, and this pattern has drawn enforcement attention. The more durable levers for a bulky category are renegotiating FOB cost, consolidating freight to cut the per-unit landed hit, and moving to knock-down (flat-pack) construction that ships denser — then modeling all-in landed cost per origin before committing, since the lowest-tariff country is rarely the lowest landed cost once freight and any AD/CVD are counted. Confirm origin treatment for your specific goods with a licensed customs broker.
Why is my furniture duty higher than the base furniture rate I looked up?
The ordinary MFN duty for chapter 94 is generally modest, but it is rarely the whole story. Your landed duty is that base rate plus the current country-of-origin load, and for wooden bedroom furniture or certain mattresses it can also include a product-specific antidumping or countervailing duty tied to your exact origin. Those AD/CVD margins are typically set per producer and can be far larger than the ordinary rate, which is one reason two similar dressers from different factories can clear at very different totals. The exact figures depend on the specific HS code and origin.
Does flat-pack or knock-down furniture get classified differently than assembled?
It can. A complete piece imported unassembled is often still classified as the finished article under chapter 94, but kits, parts, and components can fall into separate subheadings — sometimes with different duty treatment — depending on how complete the shipment is. The practical benefit of flat-pack is usually freight: denser cartons cut your per-unit shipping, which for a bulky low-margin category can move landed cost more than chasing a fractionally lower duty line. Confirm the subheading per SKU, since how 'complete' the kit is can change the answer.
If I move furniture production from China to Vietnam, does the China rate go away?
The China-specific load can go away, but generally only if the goods genuinely originate in Vietnam under the substantial-transformation test — final assembly of Chinese parts may not be enough to change the country of origin for duty purposes. This pattern of routing through third countries has drawn enforcement attention, and an incorrect origin claim can expose you to back duties and penalties. You also have to check whether an antidumping order already covers furniture from the new country, since some orders span multiple origins. For a specific move, confirm the origin treatment with a licensed customs broker.
Why is sourcing from China more expensive on duties than other countries?
Often because the duties stack. A China import can carry its normal HTS base rate, Section 301 tariffs that apply to many goods from China, and current reciprocal-era duties at the same time, and where they apply those layers can compound on the same customs value rather than replacing one another. That compounding is a key reason China is the highest-stacked common sourcing origin into the US, and it is why the product's listed duty rate can understate what you actually pay at the border. The combined rate depends on the exact HS code, so check the combined rate for your specific HTS classification rather than the headline figure.
Should I move my sourcing out of China to avoid the tariffs?
Maybe, but run the full landed-cost math first instead of assuming an alternative is cheaper. Lower-tariff origins often offset their duty advantage with higher unit prices, longer lead times, smaller supplier bases, and qualification work, so the all-in cost can land close to China for some products. A second consideration is rules of origin: goods generally get an alternative country's treatment only if they are substantially produced or transformed there, not simply routed through it, and that determination depends on the specific HS code. The right answer is usually SKU-by-SKU, and a safer position is a qualified backup supplier outside China for your most tariff-sensitive lines. This is general guidance, not customs or legal advice.
Could the tariffs on Chinese goods change again?
They could, and planning for that is part of sourcing from China carefully. Section 301 tariff lists and reciprocal-era duty rates are set by policy and can be adjusted in ways no merchant controls, which is part of why China-sourced margins can be more exposed to rate changes than some other origins. Treat your current China rate as a number to monitor rather than a fixed input, and revisit landed cost whenever rates shift. Because the live combined duty rate depends on your exact HS code, confirm it before committing to a large order, since the rate at quote time may not be the rate at arrival. This is general guidance, not customs or legal advice.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →