Furniture is unusually exposed in the current tariff era because it is bulky, low in value per pound, and largely sourced from a small group of Asian countries, most of which face recent rate actions. A bedframe or sofa carries little duty per cubic foot of shipping, so when a surcharge stacks onto an already freight-heavy product, the added cost tends to land disproportionately on your landed price. Wood furniture has been a recurring target of trade actions, which means a current stacked rate can sit on top of pre-existing antidumping orders rather than replacing them.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
Indonesian goods enter the United States under the current reciprocal-tariff framework, which a recently signed US-Indonesia trade arrangement is still in the process of implementing. In broad terms that generally means a reciprocal duty layered on top of the normal tariff classification, while the arrangement is also expected to open reduced or zero treatment for certain qualifying originating goods and a defined volume of textiles and apparel, with several details still being finalized. For a Shopify merchant, the practical takeaway is that Indonesia is a reciprocal-era origin: it is not duty-free, but it is also not among the most heavily treated sources, so the landed-cost picture depends heavily on your specific product. Because that impact turns on whether your item falls inside any reduced-rate treatment, and because the applicable rate depends on the exact HS code, the duty line shown here should be treated as a representative starting point rather than a guarantee for every classification.
Indonesia is a credible China alternative for the right categories rather than a universal one. It has a genuinely diversified manufacturing base, with established capacity in areas such as apparel and textiles, footwear, furniture and wood products, rubber goods, and agricultural commodities, so for those lines you can often move volume without rebuilding your supply chain from scratch. The catch is that the reciprocal duty is a real cost, not a loophole, so the win comes from competitive factory pricing alongside whatever reciprocal treatment applies, not from escaping tariffs entirely. Any reduced or zero-rate treatment under the trade arrangement is generally conditional: it depends on the goods qualifying under rules of origin, and routing Chinese-made components through an Indonesian shipper does not by itself make them Indonesian-origin. Before you commit, confirm your category is something Indonesia actually makes at scale and price, and consider validating origin and classification with a qualified customs professional rather than assuming the headline rate applies to your SKU. This is general guidance, not customs or legal advice.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current Indonesia tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $250 chair from Indonesia at a 14% stacked rate, that means charging $237.50 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
Most finished furniture classifies under HTS chapter 94, where the heading turns mainly on use and material: seats (9401), other furniture such as tables, dressers, and bedframes (9403), and mattresses and bedding (9404) each carry different base treatment, and within those the material — wood, metal, plastic, or upholstered — can move the rate. The base MFN duty for the category is generally modest, but the duty that actually lands on your invoice is the country-of-origin load stacked on top, plus any product-specific antidumping or countervailing duty — for example the AD/CVD orders associated with wooden bedroom furniture and certain mattresses from specific countries — which in some cases can be much larger than the ordinary rate. Whether any such order reaches a given product, and the exact treatment, depends on the precise HS code and origin. Whether a piece is motorized, upholstered, or imported as a kit of parts versus fully assembled can also shift it into a different subheading with different treatment.
A common and costly mistake is treating every piece that holds your goods as one furniture line. Chapter 94 applies a use-and-form test: a seat generally classifies in 9401 even if it is a stool or bench, a storage cabinet generally goes in 9403, and some wall-mounted shelving or display units may fall outside chapter 94 depending on the specific article and its construction. A bigger trap is wooden bedroom furniture — dressers, nightstands, and headboards — which can fall under subheadings associated with antidumping orders; classifying such an item as generic "other wooden furniture" to sidestep that scope is the kind of call customs can reclassify on review, potentially with back duties. The precise subheading and whether an AD/CVD order reaches your SKU depend on the exact HS code and construction, so confirm it per product — ideally with a licensed customs broker — rather than applying one assumption across the whole catalog.
Furniture sourcing has shifted toward Vietnam and, increasingly, Thailand, India, and Cambodia, in part to move away from earlier China-specific actions — but a country switch only helps if it also clears any antidumping order that attaches to a specific product-and-origin pair, not just the headline tariff. Because furniture is assembly-heavy, substantial-transformation rules matter: shipping Chinese components to a third country for final assembly does not automatically change the country of origin for duty purposes, and this pattern has drawn enforcement attention. The more durable levers for a bulky category are renegotiating FOB cost, consolidating freight to cut the per-unit landed hit, and moving to knock-down (flat-pack) construction that ships denser — then modeling all-in landed cost per origin before committing, since the lowest-tariff country is rarely the lowest landed cost once freight and any AD/CVD are counted. Confirm origin treatment for your specific goods with a licensed customs broker.
Why is my furniture duty higher than the base furniture rate I looked up?
The ordinary MFN duty for chapter 94 is generally modest, but it is rarely the whole story. Your landed duty is that base rate plus the current country-of-origin load, and for wooden bedroom furniture or certain mattresses it can also include a product-specific antidumping or countervailing duty tied to your exact origin. Those AD/CVD margins are typically set per producer and can be far larger than the ordinary rate, which is one reason two similar dressers from different factories can clear at very different totals. The exact figures depend on the specific HS code and origin.
Does flat-pack or knock-down furniture get classified differently than assembled?
It can. A complete piece imported unassembled is often still classified as the finished article under chapter 94, but kits, parts, and components can fall into separate subheadings — sometimes with different duty treatment — depending on how complete the shipment is. The practical benefit of flat-pack is usually freight: denser cartons cut your per-unit shipping, which for a bulky low-margin category can move landed cost more than chasing a fractionally lower duty line. Confirm the subheading per SKU, since how 'complete' the kit is can change the answer.
If I move furniture production from China to Vietnam, does the China rate go away?
The China-specific load can go away, but generally only if the goods genuinely originate in Vietnam under the substantial-transformation test — final assembly of Chinese parts may not be enough to change the country of origin for duty purposes. This pattern of routing through third countries has drawn enforcement attention, and an incorrect origin claim can expose you to back duties and penalties. You also have to check whether an antidumping order already covers furniture from the new country, since some orders span multiple origins. For a specific move, confirm the origin treatment with a licensed customs broker.
Is sourcing from Indonesia cheaper than China after tariffs?
It can be, but it depends on your category and your product's classification. Indonesia carries its own reciprocal duty, so the comparison is the Indonesian rate plus factory pricing versus the China rate plus its pricing, landed and all-in. For categories Indonesia tends to produce competitively, such as apparel, footwear, furniture, and rubber goods, the combined number can come out lower, though that is not guaranteed. Run the full landed-cost math on your specific SKU rather than assuming a blanket win, and note that the duty figure shown here is a representative rate and that the rate that actually applies depends on the exact HS code. This is general guidance, not customs or legal advice.
Do Indonesian goods qualify for zero or reduced US tariffs?
Some may. The recently signed US-Indonesia trade arrangement is expected to provide reduced or zero reciprocal treatment for certain qualifying originating Indonesian goods and a defined volume of textiles and apparel, but that treatment is not automatic for everything shipped from Indonesia, and parts of it are still being implemented. Eligibility generally turns on rules of origin, meaning the product has to be genuinely made in Indonesia, and on whether your category and exact HS code sit inside the applicable schedule. It is worth confirming both your tariff classification and origin status with a qualified customs professional before counting on a reduced rate. This is general guidance, not customs or legal advice.
Can I avoid tariffs by routing China-made products through Indonesia?
Generally no. Simply shipping or transshipping Chinese-made goods through an Indonesian port does not by itself change their country of origin, and that practice can be treated as a customs violation. To claim Indonesian origin, the goods typically have to undergo substantial transformation in Indonesia under the applicable rules of origin, not just final packing or a paperwork change. Misrepresenting origin can carry penalties that go well beyond the duty itself, so genuine local manufacturing, rather than relabeling, is the safer path. This is general guidance, not customs or legal advice.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →