Furniture is unusually exposed in the current tariff era because it is bulky, low in value per pound, and largely sourced from a small group of Asian countries, most of which face recent rate actions. A bedframe or sofa carries little duty per cubic foot of shipping, so when a surcharge stacks onto an already freight-heavy product, the added cost tends to land disproportionately on your landed price. Wood furniture has been a recurring target of trade actions, which means a current stacked rate can sit on top of pre-existing antidumping orders rather than replacing them.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
Turkey generally ships to the United States under standard most-favored-nation (MFN) duty rates — the baseline schedule applied to normal trading partners without a preferential deal. There is no broad US free-trade agreement with Turkey, so most goods are not expected to get the kind of tariff break a USMCA or Korea-FTA origin would, and the rate you pay is driven mainly by your product's HTS classification rather than the country of origin. For landed-cost purposes that tends to make Turkey roughly duty-neutral versus other MFN-rate origins: the line that moves your cost is the category duty shown in the rate box above (a representative figure — your exact rate depends on your specific HS code), plus freight and any product-specific measures, rather than a country surcharge. One practical consideration is that Turkish-origin goods are generally not subject to the China-specific Section 301 tariffs that can inflate landed cost on Chinese-origin goods, though Turkey can face its own product-specific US measures. This is general guidance, not customs or legal advice; confirm against current US measures for your products.
Turkey can be a reasonable China alternative in the categories where its manufacturing base is established — textiles and apparel, leather, home textiles, certain steel and machined goods, food and personal care — and a common reason cited is what it avoids: standard MFN duty with no China-style Section 301 surcharge layered on top. The trade-off is that Turkey carries its own load rather than being a clean discount. You would typically pay full MFN duty, not a preferential rate, so the base duty line alone is usually no lower than other MFN origins; any savings tend to come from not facing China-specific stacking rather than from a Turkey-specific break. Weigh in freight and lead time from a more distant origin, lira and energy-cost volatility that can swing quoted prices, and product-specific US measures that affect some Turkish sectors more than others (steel and aluminum derivative articles are a recurring example). It is also not a way to route Chinese components and relabel them Turkish: that is transshipment, and origin generally turns on where substantial transformation actually occurs — a determination best confirmed with a licensed customs broker. A practical approach is to treat Turkey as a possible second source where its manufacturing base is deep, run the landed-cost math against your specific HTS line, and verify any duty assumption against current US measures before committing volume. This is general guidance, not customs or legal advice.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current Turkey tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $250 chair from Turkey at a 14% stacked rate, that means charging $237.50 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
Most finished furniture classifies under HTS chapter 94, where the heading turns mainly on use and material: seats (9401), other furniture such as tables, dressers, and bedframes (9403), and mattresses and bedding (9404) each carry different base treatment, and within those the material — wood, metal, plastic, or upholstered — can move the rate. The base MFN duty for the category is generally modest, but the duty that actually lands on your invoice is the country-of-origin load stacked on top, plus any product-specific antidumping or countervailing duty — for example the AD/CVD orders associated with wooden bedroom furniture and certain mattresses from specific countries — which in some cases can be much larger than the ordinary rate. Whether any such order reaches a given product, and the exact treatment, depends on the precise HS code and origin. Whether a piece is motorized, upholstered, or imported as a kit of parts versus fully assembled can also shift it into a different subheading with different treatment.
A common and costly mistake is treating every piece that holds your goods as one furniture line. Chapter 94 applies a use-and-form test: a seat generally classifies in 9401 even if it is a stool or bench, a storage cabinet generally goes in 9403, and some wall-mounted shelving or display units may fall outside chapter 94 depending on the specific article and its construction. A bigger trap is wooden bedroom furniture — dressers, nightstands, and headboards — which can fall under subheadings associated with antidumping orders; classifying such an item as generic "other wooden furniture" to sidestep that scope is the kind of call customs can reclassify on review, potentially with back duties. The precise subheading and whether an AD/CVD order reaches your SKU depend on the exact HS code and construction, so confirm it per product — ideally with a licensed customs broker — rather than applying one assumption across the whole catalog.
Furniture sourcing has shifted toward Vietnam and, increasingly, Thailand, India, and Cambodia, in part to move away from earlier China-specific actions — but a country switch only helps if it also clears any antidumping order that attaches to a specific product-and-origin pair, not just the headline tariff. Because furniture is assembly-heavy, substantial-transformation rules matter: shipping Chinese components to a third country for final assembly does not automatically change the country of origin for duty purposes, and this pattern has drawn enforcement attention. The more durable levers for a bulky category are renegotiating FOB cost, consolidating freight to cut the per-unit landed hit, and moving to knock-down (flat-pack) construction that ships denser — then modeling all-in landed cost per origin before committing, since the lowest-tariff country is rarely the lowest landed cost once freight and any AD/CVD are counted. Confirm origin treatment for your specific goods with a licensed customs broker.
Why is my furniture duty higher than the base furniture rate I looked up?
The ordinary MFN duty for chapter 94 is generally modest, but it is rarely the whole story. Your landed duty is that base rate plus the current country-of-origin load, and for wooden bedroom furniture or certain mattresses it can also include a product-specific antidumping or countervailing duty tied to your exact origin. Those AD/CVD margins are typically set per producer and can be far larger than the ordinary rate, which is one reason two similar dressers from different factories can clear at very different totals. The exact figures depend on the specific HS code and origin.
Does flat-pack or knock-down furniture get classified differently than assembled?
It can. A complete piece imported unassembled is often still classified as the finished article under chapter 94, but kits, parts, and components can fall into separate subheadings — sometimes with different duty treatment — depending on how complete the shipment is. The practical benefit of flat-pack is usually freight: denser cartons cut your per-unit shipping, which for a bulky low-margin category can move landed cost more than chasing a fractionally lower duty line. Confirm the subheading per SKU, since how 'complete' the kit is can change the answer.
If I move furniture production from China to Vietnam, does the China rate go away?
The China-specific load can go away, but generally only if the goods genuinely originate in Vietnam under the substantial-transformation test — final assembly of Chinese parts may not be enough to change the country of origin for duty purposes. This pattern of routing through third countries has drawn enforcement attention, and an incorrect origin claim can expose you to back duties and penalties. You also have to check whether an antidumping order already covers furniture from the new country, since some orders span multiple origins. For a specific move, confirm the origin treatment with a licensed customs broker.
Does the US have a free-trade agreement with Turkey that lowers my duty?
No. There is no broad US-Turkey free-trade agreement, so most goods are generally expected to enter at standard MFN duty rates rather than a preferential rate. Your duty is set by your product's HTS classification; the figure shown in the rate box above is a representative number for this category, and your exact rate depends on your specific HS code. Any tariff-program savings would depend on a particular program and its rules of origin, not on simply shipping from Turkey. This is general guidance, not customs or legal advice.
Is sourcing from Turkey cheaper on duty than sourcing from China?
It depends on the product, and the meaningful difference is usually not the base duty — it is the China-specific surcharges. Turkish-origin goods generally pay standard MFN duty without the Section 301 stacking that applies to many Chinese-origin products, which can make total landed cost lower even when the base MFN rate is similar. Run the numbers on your exact HS code and compare full landed cost, not just the headline duty, since freight and lead time from Turkey differ from China. This is general guidance, not customs or legal advice.
Are there product-specific US tariffs I should watch for on Turkish goods?
Possibly. Beyond standard MFN duty, certain sectors can face product-specific US measures — steel and aluminum and their derivative articles are a recurring example — and these can apply regardless of the broader trade relationship. Because such measures change and depend on precise product scope, confirm whether your specific items are covered before you price or commit volume. When duty treatment materially affects your margin, verify it against current US measures for your exact HS code rather than relying on a general category figure. This is general guidance, not customs or legal advice.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →