Furniture is unusually exposed in the current tariff era because it is bulky, low in value per pound, and largely sourced from a small group of Asian countries, most of which face recent rate actions. A bedframe or sofa carries little duty per cubic foot of shipping, so when a surcharge stacks onto an already freight-heavy product, the added cost tends to land disproportionately on your landed price. Wood furniture has been a recurring target of trade actions, which means a current stacked rate can sit on top of pre-existing antidumping orders rather than replacing them.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
Pakistan ships to the United States as a normal-trade-relations partner, but it has no free trade agreement with the U.S. and is not currently covered by a U.S. preference program such as GSP, so its goods generally carry standard MFN duties plus the reciprocal-era tariff load applied broadly in the current trade environment. Pakistan is a textiles-heavy origin: cotton apparel, home textiles, towels, and bed linens make up much of what it sends here, and those categories tend to sit among the higher base HTS duty lines before any reciprocal load stacks on top. The combined effect is what matters for landed cost — the duty applies to your customs value on every shipment, so a meaningful add-on can quietly turn a healthy SKU margin negative. The representative stacked rate for your category is in the rate box above; treat it as a directional estimate, since your exact duty depends on the precise HS classification of your specific product.
Pakistan can be a real China alternative for textiles and a handful of leather and surgical-instrument lines, but it is not a tariff loophole — it generally carries its own reciprocal-era load, so the win tends to come from diversification and competitive factory pricing rather than from avoiding duty. The honest read: Pakistan's edge is its cotton supply chain — it is a major cotton grower and runs vertically integrated mills — which can offset part of the tariff at the unit-cost level, but that strength is fairly narrow. Outside textiles, leather goods, and sporting/surgical goods, the supplier base tends to thin out, and lead times, freight routing, and quality consistency can be less predictable than China or Vietnam. The point most merchants miss is rules of origin: simply finishing or relabeling a China-made input in Pakistan does not necessarily make it a Pakistani-origin product for duty purposes, and if substantial transformation does not occur, CBP may treat it as Chinese origin and assess it accordingly, potentially with penalties. As a general approach, source there for genuinely Pakistan-made cotton and textile products where the cost advantage is structural, model the landed cost with the stacked rate baked in before you commit, and keep a second origin qualified so a tariff or policy shift on one country can't strand your whole catalog. Confirm origin treatment and classification with a licensed customs broker before you rely on it.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current Pakistan tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $250 chair from Pakistan at a 14% stacked rate, that means charging $237.50 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
Most finished furniture classifies under HTS chapter 94, where the heading turns mainly on use and material: seats (9401), other furniture such as tables, dressers, and bedframes (9403), and mattresses and bedding (9404) each carry different base treatment, and within those the material — wood, metal, plastic, or upholstered — can move the rate. The base MFN duty for the category is generally modest, but the duty that actually lands on your invoice is the country-of-origin load stacked on top, plus any product-specific antidumping or countervailing duty — for example the AD/CVD orders associated with wooden bedroom furniture and certain mattresses from specific countries — which in some cases can be much larger than the ordinary rate. Whether any such order reaches a given product, and the exact treatment, depends on the precise HS code and origin. Whether a piece is motorized, upholstered, or imported as a kit of parts versus fully assembled can also shift it into a different subheading with different treatment.
A common and costly mistake is treating every piece that holds your goods as one furniture line. Chapter 94 applies a use-and-form test: a seat generally classifies in 9401 even if it is a stool or bench, a storage cabinet generally goes in 9403, and some wall-mounted shelving or display units may fall outside chapter 94 depending on the specific article and its construction. A bigger trap is wooden bedroom furniture — dressers, nightstands, and headboards — which can fall under subheadings associated with antidumping orders; classifying such an item as generic "other wooden furniture" to sidestep that scope is the kind of call customs can reclassify on review, potentially with back duties. The precise subheading and whether an AD/CVD order reaches your SKU depend on the exact HS code and construction, so confirm it per product — ideally with a licensed customs broker — rather than applying one assumption across the whole catalog.
Furniture sourcing has shifted toward Vietnam and, increasingly, Thailand, India, and Cambodia, in part to move away from earlier China-specific actions — but a country switch only helps if it also clears any antidumping order that attaches to a specific product-and-origin pair, not just the headline tariff. Because furniture is assembly-heavy, substantial-transformation rules matter: shipping Chinese components to a third country for final assembly does not automatically change the country of origin for duty purposes, and this pattern has drawn enforcement attention. The more durable levers for a bulky category are renegotiating FOB cost, consolidating freight to cut the per-unit landed hit, and moving to knock-down (flat-pack) construction that ships denser — then modeling all-in landed cost per origin before committing, since the lowest-tariff country is rarely the lowest landed cost once freight and any AD/CVD are counted. Confirm origin treatment for your specific goods with a licensed customs broker.
Why is my furniture duty higher than the base furniture rate I looked up?
The ordinary MFN duty for chapter 94 is generally modest, but it is rarely the whole story. Your landed duty is that base rate plus the current country-of-origin load, and for wooden bedroom furniture or certain mattresses it can also include a product-specific antidumping or countervailing duty tied to your exact origin. Those AD/CVD margins are typically set per producer and can be far larger than the ordinary rate, which is one reason two similar dressers from different factories can clear at very different totals. The exact figures depend on the specific HS code and origin.
Does flat-pack or knock-down furniture get classified differently than assembled?
It can. A complete piece imported unassembled is often still classified as the finished article under chapter 94, but kits, parts, and components can fall into separate subheadings — sometimes with different duty treatment — depending on how complete the shipment is. The practical benefit of flat-pack is usually freight: denser cartons cut your per-unit shipping, which for a bulky low-margin category can move landed cost more than chasing a fractionally lower duty line. Confirm the subheading per SKU, since how 'complete' the kit is can change the answer.
If I move furniture production from China to Vietnam, does the China rate go away?
The China-specific load can go away, but generally only if the goods genuinely originate in Vietnam under the substantial-transformation test — final assembly of Chinese parts may not be enough to change the country of origin for duty purposes. This pattern of routing through third countries has drawn enforcement attention, and an incorrect origin claim can expose you to back duties and penalties. You also have to check whether an antidumping order already covers furniture from the new country, since some orders span multiple origins. For a specific move, confirm the origin treatment with a licensed customs broker.
Does the U.S. have a trade deal with Pakistan that lowers tariffs?
No. Pakistan trades with the U.S. on normal-trade-relations (MFN) terms, has no free trade agreement, and is not currently benefiting from a U.S. preference program such as GSP, so there is generally no preferential program to reduce your duty. Your imports typically pay the standard HTS rate for the product plus the reciprocal-era load in effect, which is why the stacked rate matters. Qualifying for any future preference would still depend on rules of origin, not just shipping from Pakistan. This is general guidance, not customs advice.
Is Pakistan cheaper than China once tariffs are included?
Sometimes, and mainly for cotton-based textiles. Pakistan's vertically integrated cotton and mill base can deliver a low enough unit cost that the total landed cost beats China for apparel, towels, and bed linens even after both origins carry a reciprocal-era load. For non-textile categories the supplier depth and cost advantage are often weaker, so run the actual landed-cost math per SKU with the stacked rate from the rate box rather than assuming Pakistan always wins. This is general guidance, not customs advice.
If my supplier uses Chinese fabric or components, what origin do I declare?
Origin generally turns on where the product is substantially transformed, not where it ships from. If a Pakistani factory does enough manufacturing — for example, spinning, weaving, and cutting-and-sewing a garment — the product is typically treated as Pakistani origin; if it merely finishes or relabels an essentially China-made item, CBP may treat it as Chinese origin and assess the corresponding rate. Have your factory document the production steps and the source of major inputs, and confirm the classification, because a wrong origin call can expose you to back duties and penalties. Verify specifics with a licensed customs broker.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →