Garden and outdoor goods often sit at the intersection of two heavily layered tariff regimes: plastics and resins (HTS chapter 39) and iron and steel articles (HTS chapter 73), both of which can draw additional duties on top of the base rate. A patio set, planter, or hose reel that landed cheaply two years ago may now carry a much higher all-in rate once steel-derivative and country-specific actions are applied, though how much higher depends on the exact HS code, the country of origin, and which actions are in force. Because this category is bulky, low-margin, and largely imported, that increase tends to eat directly into per-unit profit rather than getting absorbed in volume.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
Goods from Taiwan generally enter the US under standard most-favored-nation (Column 1) duty treatment, so the base rate is set by each product's HS code rather than by any China-style punitive surcharge. Taiwan may carry some limited additional load on top of the base duty, but it is not subject to the China-specific Section 301 stack, which tends to keep landed cost more predictable than for Chinese-origin goods. For Shopify merchants this matters because the duty you pay tracks your classification, not a separate Section 301 list. The rate box on this page is a representative working figure tied to MFN duty plus any limited additional load that applies, not a guaranteed per-SKU rate. None of this is customs or legal advice, and your exact per-SKU duty still depends on how your product is classified under its specific HS code.
For many categories Taiwan can be a margin-friendlier alternative to China: there is no China-specific Section 301 layer, the base duty is the MFN rate for your HS code, and Taiwan is an established manufacturing base, particularly for electronics, semiconductors, and precision components, so quality and supplier reliability are often not the bottleneck. The catch is that "no China surcharge" does not mean "low cost." Taiwan still carries the MFN base duty plus whatever limited additional load applies, its labor and input costs typically run higher than lower-wage Southeast Asian hubs, and capacity for high-end manufacturing can come at a premium. There is also no comprehensive US-Taiwan free trade agreement, so you should not assume duty-free entry the way an FTA partner might offer, and qualifying for any reduced-duty program would depend on rules of origin you would need to verify against your actual bill of materials. Treat Taiwan as a de-risking option for electronics and precision goods rather than the cheapest possible origin, and run the landed-cost math per SKU, against your exact HS code, before shifting volume.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current Taiwan tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $65 patio set from Taiwan at a 14% stacked rate, that means charging $61.75 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
Duty here is driven less by the base rate (in the low-single-digit MFN range for this category, with the representative figure shown in the rate box) and more by what the item is physically made of and where it ships from. Steel-framed furniture, fencing, brackets, and fasteners generally classify under chapter 73 and can be exposed to Section 232 steel-derivative duties, while resin and plastic items such as planters, outdoor storage, hoses, and plastic-bodied garden tools generally classify under chapter 39 and may pick up country-specific Section 301 and other layers depending on origin. The attributes that tend to move the rate are the dominant material by weight or value, whether a metal component is treated as steel-derivative, the article's specific function, and the country of origin used for China and other targeted-country actions. Two outdoor products that look identical on a product page can carry very different all-in rates because one has a steel frame and the other is all-aluminum or all-resin. The exact rate still depends on the specific 10-digit HS code and the actions currently in effect.
A common pitfall for this category is classifying a mixed-material outdoor set under one "convenience" code for the whole kit instead of by the component that governs. A cushioned steel-frame patio set is not necessarily one classification covering the textile cushions, the resin side table, and the powder-coated steel frame; for mixed-material kits like this, classification generally turns on which component gives the set its essential character (a concept reflected in the General Rules of Interpretation), and the controlling heading depends on how the specific SKU is built. Merchants often default the full set to a furniture or plastics heading and may miss that a steel frame can pull it into chapter 73 with steel-derivative exposure, which can quietly understate landed cost. Because the exact 10-digit code depends on how the SKU is constructed, it is worth classifying by the dominant structural material rather than by how the product is marketed, and confirming borderline cases with a customs professional.
Because most of this category's added duty tends to come from country-specific steel and China actions rather than the base rate, shifting origin can move the number meaningfully, but only if the change is real. Substantial transformation matters: simply assembling Chinese-made steel frames in a third country generally does not change the origin for Section 301 purposes, and steel-derivative duties may follow the steel's melt-and-pour origin regardless of where assembly happens. The more durable mitigations for outdoor goods include choosing all-aluminum or all-resin versions where the design allows (which can sidestep the steel-derivative layer entirely), consolidating to fewer high-volume SKUs so tariff engineering is worth the effort, and confirming the supplier's true country of melt and origin in writing rather than relying on the shipping origin printed on the invoice. For specific shipments, confirm the exact HS code and origin treatment with a customs professional.
Why did the duty on my patio furniture jump even though the base rate is still low?
The base MFN rate on these goods is in the low single digits, but steel-framed outdoor furniture generally sits in HTS chapter 73 and can pick up Section 232 steel-derivative duties on top of that base. If the steel originates in or is sourced from a targeted country, additional Section 301 or other layers may stack as well. It is the all-in rate, not the base rate, that hits your margin, and how high it lands depends on the exact HS code, the country of origin, and the actions currently in force.
Is my resin planter taxed differently than my steel plant stand?
Often yes. Resin and plastic outdoor items generally classify under chapter 39 and may draw plastics-specific country actions, while steel stands, frames, and brackets generally classify under chapter 73 and can be exposed to steel-derivative duties. Same product family and same shelf, but different chapters and potentially different stacked rates. That is why two visually similar SKUs in your catalog can have very different landed costs, and why it helps to price and forecast them separately based on each item's actual HS code.
Can I avoid the steel tariffs by having my outdoor furniture assembled in another country?
Usually not on its own. For origin purposes what matters is substantial transformation, and bolting together steel frames that were melted and poured in a targeted country generally does not change the tariff origin. Steel-derivative duties may follow the steel's actual origin regardless of where final assembly happens. A more reliable path is sourcing genuinely different construction, such as an all-aluminum or all-resin version, or confirming the supplier's melt-and-pour origin in writing before you commit. For a specific shipment, confirm the HS code and origin treatment with a customs professional.
Does sourcing from Taiwan avoid the China Section 301 tariffs?
Generally yes for the China-specific layer. Section 301 tariffs apply to products of China, so Taiwanese-origin goods are typically not subject to that particular stacked surcharge. You would still pay the standard MFN base duty for your product's HS code plus any limited additional load that applies, so Taiwan is usually lower-duty than China but not duty-free. Origin is determined by where the product is substantially transformed, not just final assembly, so verify your supply chain actually qualifies as Taiwanese before assuming the China rate disappears. Confirm your specific HS classification, since that is what sets the rate.
Is there a US-Taiwan free trade agreement that makes imports duty-free?
No comprehensive US-Taiwan free trade agreement is in force, so you should not assume duty-free entry. Some narrower bilateral trade arrangements have been discussed or pursued, but none functions as a broad tariff-elimination FTA the way agreements with some other partners do. Your duty is the MFN rate for your classification plus any additional load that applies, and qualifying for any reduced-duty program would depend on specific rules of origin. Treat the rate box on this page as a working number and confirm your exact HS classification before committing volume.
Is Taiwan a good origin for electronics specifically?
Often, yes. Taiwan is a major electronics and semiconductor manufacturing hub with established capability in chips, components, and precision assembly, so for many electronics categories it can offer solid quality and supplier reliability without the China-specific Section 301 layer. The trade-off is cost: high-end Taiwanese manufacturing often prices above lower-wage Southeast Asian alternatives, and you still owe the MFN base duty for your HS code. Run the per-SKU landed-cost math, because the right answer depends on your specific product, its exact HS classification, and your target margin rather than the country alone.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →