Eyewear is a category where the headline duty is modest but the stacked landed cost may not be, because much of the production base sits in origins now carrying additional tariff layers. A meaningful share of sunglasses and frames is produced in China, where Section 301 duties and any current US tariff actions that apply can layer on top of the base rate, so a low single-digit base duty can translate into a noticeably higher effective rate per unit. For a low-AOV accessory often bought on impulse, that gap tends to land on margin rather than being absorbed in a high sticker price. The exact figure depends on the specific ten-digit HS code and the country of origin.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
Bangladesh is a major apparel-sourcing origin for the US market, and in the current reciprocal-tariff era its goods generally carry a country-level reciprocal duty in addition to the ordinary Most-Favored-Nation rate tied to each product's HTS classification. For a merchant, that means landed cost is driven by the stack of the base MFN rate, the applicable reciprocal duty, and freight, and the combined figure can be material even though Bangladesh has long been a lower-cost manufacturing base. How much duty a given item carries depends mostly on its own HTS classification, and category-level treatment can vary, so do not assume the same exposure across garments, accessories, and other finished goods. Treat the rate box on this page as the representative number, and confirm the exact duty for your specific HTS code before committing to a costing.
Bangladesh is best understood as a genuine alternative to China rather than a duty-free escape hatch: it has historically lower factory labor costs and established capacity in soft goods, but it now carries its own reciprocal-era load, so the China-versus-Bangladesh comparison comes down to whose total stacked rate plus unit cost wins for your specific product, not to one country being tariff-free. The real catch is concentration and capability mix. Bangladesh's strength is concentrated in apparel and textile-adjacent manufacturing, so it can be a strong margin play there while being a thinner or less-proven option for harder categories like electronics, where supplier depth and component sourcing may be limited. Practically, a merchant should price the landed cost both ways using the actual HTS rate for each item, factor in lead times and minimum order quantities common to the region, and not assume the reciprocal duty alone makes the move worthwhile. This is general guidance, not customs or legal advice, and any tariff relief or preference-program eligibility hinges on rules of origin and proper documentation, which you should confirm with a licensed customs broker.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current Bangladesh tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $30 pair of sunglasses from Bangladesh at a 12.5% stacked rate, that means charging $19.69 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
These goods sit in Chapter 90 (optical instruments), usually heading 9004, with frames and mountings imported on their own generally falling under heading 9003. A primary driver of the effective rate is often country of origin rather than the base duty alone: China-origin eyewear can stack Section 301 plus any current US tariff actions that apply on top of the base rate, while goods qualifying under a trade preference may land lower. Within 9004 the rate also depends on what the article actually is at the eight- and ten-digit level: sunglasses with a tinted, UV-filtering lens (9004.10) are generally treated differently from other corrective or protective spectacles and clear-lens readers (9004.90), and value, materials, and whether the lens is prescription can each affect the precise per-SKU number. Because the exact rate turns on the full ten-digit code and the origin, treat any single percentage as indicative and confirm the line for your specific product.
A recurring trap is the line between 9004.10 (sunglasses) and 9004.90 (other spectacles), and it can be misread in both directions. Blue-light-blocking glasses and clear-lens readers with no meaningful tint are generally not sunglasses and typically belong in 9004.90, while a tinted, UV-filtering lens generally pulls the article into 9004.10 even when it also carries a prescription or fashion styling. A second pitfall is shipping frames separately: empty fashion frames and frame components generally classify under 9003, not 9004, so a "sunglasses" SKU brought in as frames-plus-lenses on different lines can be classified and rated differently than the assembled finished product. If you are unsure how a split shipment should be classified, confirm the treatment with a licensed customs broker before relying on it.
Origin is often what moves landed cost most in this category, because the added duty layers tend to be origin-driven rather than product-driven. Eyewear assembly has a credible footprint outside China, with sunglasses and frame production established in places such as Italy and growing capacity in Vietnam, so sourcing the same design from a non-China origin may reduce the surcharge layer that dominates the China figure. Whether an origin claim holds generally turns on where the lens and frame are actually assembled and finished rather than where a label is applied, so confirm any origin claim is defensible with a customs professional before counting on it. Even within China sourcing, confirming your ten-digit code, reviewing order structure, and reviewing valuation methods such as first-sale where they genuinely apply may help, though each should be confirmed with a customs professional rather than assumed.
Are sunglasses and prescription glasses classified the same way for duty?
Not exactly. Both generally sit in heading 9004, but sunglasses with a tinted, UV-filtering lens typically fall under 9004.10 while non-sun corrective and protective spectacles, including clear-lens readers, typically fall under 9004.90. A tinted prescription sunglass is generally still treated as a sunglass under 9004.10, so the UV-filtering tint, not the prescription, is usually what drives the subheading. Confirm the exact ten-digit code for your specific product.
Why is my eyewear import cost so much higher than the base duty rate suggests?
The base duty for this category is relatively low, but it is often not the whole story. China-origin eyewear can stack Section 301 duties and any current US tariff actions that apply on top of that base rate, so the effective rate per unit can be materially higher than the headline number. Model the stacked rate for your specific origin and ten-digit HS code rather than relying on the base line alone.
Does importing frames and lenses separately reduce my duty?
It generally changes the classification rather than reliably reducing the cost, and it can backfire. Empty frames and mountings generally classify under heading 9003, separate lenses may classify elsewhere, and assembled sunglasses generally sit in 9004, so splitting a finished product into components shifts which rate applies and may prompt a reclassification on review. Confirm the correct ten-digit code for how the goods actually arrive, ideally with a licensed customs broker, before assuming a component split saves money.
Is sourcing from Bangladesh cheaper than China after tariffs?
It can be, but not automatically. Bangladesh goods generally carry their own reciprocal-era duty in addition to the standard MFN rate for each product, so the comparison depends on the total stacked rate plus the unit cost for your specific item. In categories where Bangladesh has strong, lower-cost capacity, the combined landed cost may beat China; in others it may not. Price both origins using the actual HTS rate for your product rather than assuming a flat advantage.
What product categories is Bangladesh actually competitive in?
Bangladesh's manufacturing depth is concentrated in apparel and textile-adjacent soft goods, where it has historically offered established capacity and lower labor costs. For harder categories such as electronics or complex assembled products, supplier depth and component sourcing can be thinner, so vetting individual factories matters more. Match the category to the country's real capability rather than assuming broad coverage across every product type.
Does shipping from Bangladesh avoid US tariffs?
No. Goods of Bangladeshi origin are generally dutiable on entry, and the current reciprocal-era duty typically applies in addition to the ordinary rate tied to each product's HTS classification. As a general matter, origin turns on where a product is substantially made rather than where it ships from, so routing through another country does not by itself change the duty owed. Any reduced rate or preference program depends on rules of origin and documentation, which a licensed customs broker should confirm for your goods.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →