Tools and hardware sit in supply chains that several recent tariff actions touch, so a category that long moved on a modest base duty can now see stacked China-origin and steel-and-aluminum measures added on top. A drill set, wrench kit, or box of fasteners that once cleared near the base rate may now carry additional layers depending on its origin and materials, and a large share of this category is still sourced from China. For a merchant selling at a fixed shelf price, much of that gap tends to be absorbed out of margin rather than passed cleanly to the buyer.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
Cambodia is a long-standing low-cost manufacturing base whose exports to the US now carry a reciprocal-era tariff load on top of the normal HTS base duty set by each product's classification. That stacking matters for landed cost: the country-specific load can apply on top of the base rate across many categories, so the duty you pay may no longer be just the historic base rate for your goods, though the exact treatment still depends on your product's HS code. Cambodia has no comprehensive US free trade agreement, so there is no across-the-board duty preference to fall back on, and the representative stacked rate in the box above reflects the current-era treatment. Because rates in this era are set largely through policy action and have been adjusted on short timelines, the number can change between order cycles, so treat it as a snapshot rather than a fixed input.
Cambodia is a genuine China alternative for apparel and footwear and a common first stop when diversifying out of China, but it is not a duty-free escape hatch. It carries its own reciprocal-era load, so the right comparison is Cambodia's stacked rate against China's stacked rate for your specific HS codes, not Cambodia against a pre-tariff baseline. The catch is twofold: the country load is set at the national level, while the duty you actually pay still tracks each product's HS classification, and rules of origin decide whether goods count as Cambodian in the first place. If fabric, components, or major assembly trace back to China, transshipment and substantial-transformation scrutiny can negate the benefit, and any preferential program you hope to use depends on meeting its origin rules. Treat Cambodia as a way to reduce, not eliminate, tariff exposure, and validate the landed-cost delta per SKU before committing volume.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current Cambodia tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $50 tool set from Cambodia at a 39% stacked rate, that means charging $57.92 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
What usually moves the landed rate is not the base MFN line in HTS chapter 82 on its own; it is the layers that can be added on top based on origin and material.
For a mixed tool set, customs generally classifies the set under the General Rules of Interpretation (GRI 3) by the component that gives it its essential character, rather than applying a blended rate. Confirm the classification for your specific set.
In general, country of origin is determined by where substantial transformation occurs, not by where goods are repackaged. Treat this as general guidance and confirm origin for your specific products.
Why did the duty on my imported tools go up so much when the base rate is still only a few percent?
The base MFN duty under HTS chapter 82 has not changed much, but a large share of tools and hardware ships from China, which can carry Section 301 tariffs along with newer reciprocal-tariff actions on top of that base rate. Steel-bodied tools may also pick up a Section 232 layer. Those stacked layers, not the base line, are typically what drive landed cost up, and the exact total depends on your specific HS code and origin.
Are hand tools and power tools treated differently for tariff purposes?
Often, yes, and it can matter. Non-powered hand tools generally sit in HTS chapter 82, while a tool with its own electric or pneumatic motor often falls under chapter 84 or 85, which can carry a different base rate and different Section 232 steel exposure. If you sell both, do not assume one duty rate covers your whole catalog, and confirm the heading for each powered SKU separately.
Will moving production out of China actually lower my duty on hardware?
It can, but generally only if the goods are genuinely produced or substantially transformed in the new country, not just repackaged or relabeled there. Country of origin generally follows where the substantial transformation happens, so Chinese-made tools routed through a third country can keep their Chinese origin and the associated tariffs. As general guidance, confirm that any alternate source represents real production rather than transshipment, and keep documentation such as mill certificates and bills of materials to support the origin you claim at entry.
Is sourcing from Cambodia cheaper than from China after tariffs?
Often, but not automatically. Cambodia carries its own reciprocal-era load on top of the base HTS duty, so the saving comes from the gap between Cambodia's stacked rate and China's stacked rate for your exact products, not from any duty-free status. Run the landed-cost math per HS code, since the answer can flip for some categories. This is general guidance, not customs advice.
Does Cambodia qualify for duty-free treatment into the US?
Do not assume so. Cambodia has no comprehensive US free trade agreement, and any preferential program is conditional on meeting its rules of origin, which depend on where materials and processing actually originate. Consider confirming eligibility for your specific goods with a customs broker before pricing a duty-free landed cost. This is general guidance, not customs advice.
Could goods I source from Cambodia be treated as Chinese for tariff purposes?
Possibly, if origin is not genuinely Cambodian. Customs generally looks at substantial transformation, and apparel and footwear typically have category-specific origin rules. If fabric or key components come from China and only light finishing happens in Cambodia, the goods may be treated as Chinese or flagged for transshipment, which can wipe out the intended saving. Keep supplier documentation that supports the country of origin you declare, and confirm the specifics with a customs broker. This is general guidance, not customs advice.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →