Lighting is one of the categories where the current tariff era can stack up, because decorative and household fixtures are often produced in a relatively concentrated set of overseas factories, and a base duty that was once minor may now sit underneath a heavier country-specific load. The category is also bulky and low-margin per unit, so freight and duty tend to move together, and even a few points of added duty can flip a fixture from profitable to underwater. Lighting SKUs are also easy to misclassify, and the wrong code can attach a meaningfully different rate to a product you have been selling for years.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
Goods from Taiwan generally enter the US under standard most-favored-nation (Column 1) duty treatment, so the base rate is set by each product's HS code rather than by any China-style punitive surcharge. Taiwan may carry some limited additional load on top of the base duty, but it is not subject to the China-specific Section 301 stack, which tends to keep landed cost more predictable than for Chinese-origin goods. For Shopify merchants this matters because the duty you pay tracks your classification, not a separate Section 301 list. The rate box on this page is a representative working figure tied to MFN duty plus any limited additional load that applies, not a guaranteed per-SKU rate. None of this is customs or legal advice, and your exact per-SKU duty still depends on how your product is classified under its specific HS code.
For many categories Taiwan can be a margin-friendlier alternative to China: there is no China-specific Section 301 layer, the base duty is the MFN rate for your HS code, and Taiwan is an established manufacturing base, particularly for electronics, semiconductors, and precision components, so quality and supplier reliability are often not the bottleneck. The catch is that "no China surcharge" does not mean "low cost." Taiwan still carries the MFN base duty plus whatever limited additional load applies, its labor and input costs typically run higher than lower-wage Southeast Asian hubs, and capacity for high-end manufacturing can come at a premium. There is also no comprehensive US-Taiwan free trade agreement, so you should not assume duty-free entry the way an FTA partner might offer, and qualifying for any reduced-duty program would depend on rules of origin you would need to verify against your actual bill of materials. Treat Taiwan as a de-risking option for electronics and precision goods rather than the cheapest possible origin, and run the landed-cost math per SKU, against your exact HS code, before shifting volume.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current Taiwan tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $45 lamp from Taiwan at a 14% stacked rate, that means charging $41.04 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
The core of lighting classification is HTS heading 9405, which covers luminaires and lighting fittings (lamps, ceiling and wall fixtures, string lights, and their parts) regardless of the light source. The base duty for many finished fixtures is relatively modest, but the rate that actually hits your landed cost tends to be driven by three attributes: the material of the fixture body (a brass or glass lamp may sit at a different subheading than a plastic one), whether the item is a complete fixture versus a part such as a shade or base, and the country of origin, which is what can pull in the heavier current-era load. Light sources themselves can fall outside the heading, which is one place rate surprises tend to come from. The exact per-SKU duty depends on the precise HS code, so two products that look identical on your storefront can carry different rates.
A common lighting pitfall is the LED line: an LED bulb or retrofit lamp is often classified outside the 9405 fixture heading (an electric lamp can fall under a different heading entirely), and an integrated LED module or driver may be pulled toward yet another heading. Merchants who file an entire lighting catalog under one 9405 code because everything ships as a 'lamp' can end up applying the wrong duty to their LED-source items, and because LED products are a growing share of many stores, that single misread can distort the margin on high-volume SKUs. When the bulb and the fixture ship together as one sellable unit, the classification can hinge on which component gives the article its essential character, so it is worth confirming the code per SKU rather than per category.
Lighting assembly is relatively mobile, which can make origin shifting more realistic here than in categories with concentrated raw-material supply, and some Southeast Asian countries already run fixture assembly lines that may change the country-specific load on your landed cost. The catch is that origin for duty purposes generally follows where substantial transformation happens, not where the box ships from, so moving final assembly while still importing the metalwork, glass, and electronics from a high-load origin may not move your rate the way you expect; that analysis is fact-specific. Before committing to a supplier change, price the same fixture against a few candidate origins and confirm the classification holds, since a heavy glass or metal fixture also carries freight cost that can erase a duty saving. This is general guidance, not a customs ruling, and the defensible answer for any specific SKU comes from its actual HS code and origin documentation.
Do string lights and seasonal fairy lights fall under the same heading as a table lamp?
Decorative lighting sets, including string and fairy lights, are generally captured within heading 9405 as lighting fittings, so they typically share the fixture base duty rather than a bulb rate. That said, battery-powered or novelty sets can fall under a different subheading depending on construction, and the country-specific load still applies on top. Confirm the exact code per product, because seasonal SKUs are often imported in bulk and a small rate difference can add up at volume.
Are replacement lampshades and fixture parts dutied differently from a complete lamp?
Parts of lighting fittings, such as standalone shades, bases, and arms, have their own provisions within the 9405 structure and can carry a different rate than the finished fixture they belong to. If you import components and assemble or kit them domestically, you may be classifying the parts rather than the complete lamp, which can change the duty and sometimes the country-of-origin analysis. It is worth treating parts SKUs as their own line in your costing rather than assuming they inherit the finished-fixture rate, and confirming the code per SKU.
My fixtures ship with the bulbs included. Does that change the tariff?
It can. When a fixture and its light source are imported together as one packaged article, classification may turn on which part gives the item its essential character, and an integrated-LED fixture can be treated differently than a traditional lamp sold with a separate replaceable bulb. Because the bulb side may pull in a code outside the 9405 fixture heading, a bundled product can land at a different rate than the bare fixture would. Check the combined article's code rather than assuming it follows the fixture alone.
Does sourcing from Taiwan avoid the China Section 301 tariffs?
Generally yes for the China-specific layer. Section 301 tariffs apply to products of China, so Taiwanese-origin goods are typically not subject to that particular stacked surcharge. You would still pay the standard MFN base duty for your product's HS code plus any limited additional load that applies, so Taiwan is usually lower-duty than China but not duty-free. Origin is determined by where the product is substantially transformed, not just final assembly, so verify your supply chain actually qualifies as Taiwanese before assuming the China rate disappears. Confirm your specific HS classification, since that is what sets the rate.
Is there a US-Taiwan free trade agreement that makes imports duty-free?
No comprehensive US-Taiwan free trade agreement is in force, so you should not assume duty-free entry. Some narrower bilateral trade arrangements have been discussed or pursued, but none functions as a broad tariff-elimination FTA the way agreements with some other partners do. Your duty is the MFN rate for your classification plus any additional load that applies, and qualifying for any reduced-duty program would depend on specific rules of origin. Treat the rate box on this page as a working number and confirm your exact HS classification before committing volume.
Is Taiwan a good origin for electronics specifically?
Often, yes. Taiwan is a major electronics and semiconductor manufacturing hub with established capability in chips, components, and precision assembly, so for many electronics categories it can offer solid quality and supplier reliability without the China-specific Section 301 layer. The trade-off is cost: high-end Taiwanese manufacturing often prices above lower-wage Southeast Asian alternatives, and you still owe the MFN base duty for your HS code. Run the per-SKU landed-cost math, because the right answer depends on your specific product, its exact HS classification, and your target margin rather than the country alone.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →