Lighting is one of the categories where the current tariff era can stack up, because decorative and household fixtures are often produced in a relatively concentrated set of overseas factories, and a base duty that was once minor may now sit underneath a heavier country-specific load. The category is also bulky and low-margin per unit, so freight and duty tend to move together, and even a few points of added duty can flip a fixture from profitable to underwater. Lighting SKUs are also easy to misclassify, and the wrong code can attach a meaningfully different rate to a product you have been selling for years.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
Sri Lanka is a long-established apparel and textile supplier to the United States, and like most trading partners it now sits in the current reciprocal-tariff era, which layers a country-level load on top of each product's base HTS duty. It does not have a US free-trade agreement, so there is generally no zero-duty shortcut on most goods, and its exports are among those that carry a reciprocal-era load. For landed cost, that means the duty on a Sri Lankan shipment is the stacked total of the product's base rate plus the prevailing reciprocal load, not the base rate alone. The exact number depends on the precise HS classification, so treat the rate box as a directional figure rather than a quote.
Sri Lanka is a workable alternative to China for apparel and soft goods, with a long track record in higher-end knitwear, intimates, and technical garments and a reputation for compliance-focused factories that larger buyers often look for. But it is not a margin-free escape hatch: it carries its own reciprocal-era load, so the question is always whether Sri Lanka's stacked rate beats your China stacked rate for your specific HS codes, not whether it is duty-free. The catches are practical as well as fiscal: capacity is concentrated in apparel, so non-textile categories have a thinner supplier base, lead times and freight from South Asia tend to run longer than from Vietnam or Mexico, and minimums at the larger factories can be high for a small Shopify catalog. Run the per-SKU landed-cost comparison before committing, because a lower base duty can be offset by the reciprocal load. Whether any preferential treatment applies would turn on the specific program and its rules of origin, which you would need to confirm for your own goods; this is general guidance, not customs or legal advice.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current Sri Lanka tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $45 lamp from Sri Lanka at a 14% stacked rate, that means charging $41.04 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
The core of lighting classification is HTS heading 9405, which covers luminaires and lighting fittings (lamps, ceiling and wall fixtures, string lights, and their parts) regardless of the light source. The base duty for many finished fixtures is relatively modest, but the rate that actually hits your landed cost tends to be driven by three attributes: the material of the fixture body (a brass or glass lamp may sit at a different subheading than a plastic one), whether the item is a complete fixture versus a part such as a shade or base, and the country of origin, which is what can pull in the heavier current-era load. Light sources themselves can fall outside the heading, which is one place rate surprises tend to come from. The exact per-SKU duty depends on the precise HS code, so two products that look identical on your storefront can carry different rates.
A common lighting pitfall is the LED line: an LED bulb or retrofit lamp is often classified outside the 9405 fixture heading (an electric lamp can fall under a different heading entirely), and an integrated LED module or driver may be pulled toward yet another heading. Merchants who file an entire lighting catalog under one 9405 code because everything ships as a 'lamp' can end up applying the wrong duty to their LED-source items, and because LED products are a growing share of many stores, that single misread can distort the margin on high-volume SKUs. When the bulb and the fixture ship together as one sellable unit, the classification can hinge on which component gives the article its essential character, so it is worth confirming the code per SKU rather than per category.
Lighting assembly is relatively mobile, which can make origin shifting more realistic here than in categories with concentrated raw-material supply, and some Southeast Asian countries already run fixture assembly lines that may change the country-specific load on your landed cost. The catch is that origin for duty purposes generally follows where substantial transformation happens, not where the box ships from, so moving final assembly while still importing the metalwork, glass, and electronics from a high-load origin may not move your rate the way you expect; that analysis is fact-specific. Before committing to a supplier change, price the same fixture against a few candidate origins and confirm the classification holds, since a heavy glass or metal fixture also carries freight cost that can erase a duty saving. This is general guidance, not a customs ruling, and the defensible answer for any specific SKU comes from its actual HS code and origin documentation.
Do string lights and seasonal fairy lights fall under the same heading as a table lamp?
Decorative lighting sets, including string and fairy lights, are generally captured within heading 9405 as lighting fittings, so they typically share the fixture base duty rather than a bulb rate. That said, battery-powered or novelty sets can fall under a different subheading depending on construction, and the country-specific load still applies on top. Confirm the exact code per product, because seasonal SKUs are often imported in bulk and a small rate difference can add up at volume.
Are replacement lampshades and fixture parts dutied differently from a complete lamp?
Parts of lighting fittings, such as standalone shades, bases, and arms, have their own provisions within the 9405 structure and can carry a different rate than the finished fixture they belong to. If you import components and assemble or kit them domestically, you may be classifying the parts rather than the complete lamp, which can change the duty and sometimes the country-of-origin analysis. It is worth treating parts SKUs as their own line in your costing rather than assuming they inherit the finished-fixture rate, and confirming the code per SKU.
My fixtures ship with the bulbs included. Does that change the tariff?
It can. When a fixture and its light source are imported together as one packaged article, classification may turn on which part gives the item its essential character, and an integrated-LED fixture can be treated differently than a traditional lamp sold with a separate replaceable bulb. Because the bulb side may pull in a code outside the 9405 fixture heading, a bundled product can land at a different rate than the bare fixture would. Check the combined article's code rather than assuming it follows the fixture alone.
Does the US have a free-trade agreement with Sri Lanka that lowers duties?
No. There is no US-Sri Lanka free-trade agreement, so most goods do not get a preferential or zero rate the way they might from an FTA partner. Sri Lankan imports generally pay the product's base HTS duty plus the prevailing reciprocal-era load. Any duty relief would hinge on a specific program and its rules of origin, which you would need to verify for your goods rather than assume. This is general guidance, not customs or legal advice.
Is Sri Lanka actually cheaper than China once tariffs are stacked?
Sometimes, but you cannot assume it. Sri Lanka carries its own reciprocal-era load, so the only honest answer comes from comparing the full stacked rate (base duty plus country load) for your exact HS codes against your China figure. Depending on the codes, the comparison can favor either origin, and a lower base rate can be offset by the reciprocal load, so check the landed cost per SKU before shifting orders. This is general guidance, not customs or legal advice.
What categories is Sri Lanka realistically good for sourcing?
Its strongest fit is apparel and textiles, especially knitwear, intimates, swimwear, and technical or performance garments, where it has mature, compliance-focused factories. Outside soft goods the supplier base is thinner, so for electronics, hard goods, or furniture you will usually find more depth in Vietnam, India, or China. Match the country to the category, and confirm a factory can meet your volume, since minimums at the larger plants can be high for a small catalog. This is general guidance, not customs or legal advice.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →