Lighting is one of the categories where the current tariff era can stack up, because decorative and household fixtures are often produced in a relatively concentrated set of overseas factories, and a base duty that was once minor may now sit underneath a heavier country-specific load. The category is also bulky and low-margin per unit, so freight and duty tend to move together, and even a few points of added duty can flip a fixture from profitable to underwater. Lighting SKUs are also easy to misclassify, and the wrong code can attach a meaningfully different rate to a product you have been selling for years.
Representative 2026 estimate stacking base MFN duty (USITC HTS 2026 Rev.10), Section 301 on China-origin goods (USTR), Section 232 on autos and steel/aluminum/copper articles (CRS IN12545), and the 10% Section 122 surcharge that expires 2026-07-24 and is under appeal (Skadden). Your exact per-SKU duty depends on the precise HS code, which MarginGuard resolves from the live HTS schedule once connected. Not legal or customs advice.
Goods imported from the Philippines into the United States carry a reciprocal-era tariff load on top of the base HTS/MFN duty set by each product's classification. The Philippines is a recurring name on "alternatives to China" lists, but the reciprocal load is real and stacks on landed cost, so it matters for every SKU's true margin. There is no single Philippines rate: the duty that applies depends on each product's exact HS code, and the representative figure for your category is in the rate box above. Because reciprocal-era rates are policy-driven and have been adjusted on short notice, treat any figure as a current snapshot rather than a fixed baseline.
The Philippines is a China-diversification origin to model, not a duty-free escape hatch: reciprocal-era duties still apply and the rate turns on your product's HS classification, so confirm the landed cost before assuming you save. The real catch is depth of supply. The Philippines has genuine strength in a few areas — electronics and semiconductor assembly, certain wood and rattan furniture, coconut-derived and food products, garments — and thinner capacity in others, so for many categories you may find fewer qualified factories, longer lead times, and less pricing leverage. Watch transshipment risk too: country-of-origin is decided by where substantial transformation happens, not where the last box was sealed, and goods that are merely finished or repacked in the Philippines after being made elsewhere can be ruled the higher-tariff origin at the border. The margin-safe move is to confirm a real Philippine supply base for your specific product, get the HS classification right, and keep origin documentation clean — not to assume the country label alone lowers your duty.
That's a single SKU. Across a full catalog the tariff hits every imported product differently depending on its cost and price — which is exactly why margin damage hides until a quarter closes light.
Paste your Shopify URL. In about ten seconds you'll see every SKU that dropped below your target margin after the current Philippines tariffs — and the exact price to charge to recover each one. Free, no login.
Scan your store free →Landed cost = unit cost × (1 + tariff rate). To get back to a target margin M, the recovery price is landed cost ÷ (1 − M). For a $45 lamp from Philippines at a 14% stacked rate, that means charging $41.04 to hold a 40% margin. Round to a clean price point and test it; the point is to stop selling underwater.
The core of lighting classification is HTS heading 9405, which covers luminaires and lighting fittings (lamps, ceiling and wall fixtures, string lights, and their parts) regardless of the light source. The base duty for many finished fixtures is relatively modest, but the rate that actually hits your landed cost tends to be driven by three attributes: the material of the fixture body (a brass or glass lamp may sit at a different subheading than a plastic one), whether the item is a complete fixture versus a part such as a shade or base, and the country of origin, which is what can pull in the heavier current-era load. Light sources themselves can fall outside the heading, which is one place rate surprises tend to come from. The exact per-SKU duty depends on the precise HS code, so two products that look identical on your storefront can carry different rates.
A common lighting pitfall is the LED line: an LED bulb or retrofit lamp is often classified outside the 9405 fixture heading (an electric lamp can fall under a different heading entirely), and an integrated LED module or driver may be pulled toward yet another heading. Merchants who file an entire lighting catalog under one 9405 code because everything ships as a 'lamp' can end up applying the wrong duty to their LED-source items, and because LED products are a growing share of many stores, that single misread can distort the margin on high-volume SKUs. When the bulb and the fixture ship together as one sellable unit, the classification can hinge on which component gives the article its essential character, so it is worth confirming the code per SKU rather than per category.
Lighting assembly is relatively mobile, which can make origin shifting more realistic here than in categories with concentrated raw-material supply, and some Southeast Asian countries already run fixture assembly lines that may change the country-specific load on your landed cost. The catch is that origin for duty purposes generally follows where substantial transformation happens, not where the box ships from, so moving final assembly while still importing the metalwork, glass, and electronics from a high-load origin may not move your rate the way you expect; that analysis is fact-specific. Before committing to a supplier change, price the same fixture against a few candidate origins and confirm the classification holds, since a heavy glass or metal fixture also carries freight cost that can erase a duty saving. This is general guidance, not a customs ruling, and the defensible answer for any specific SKU comes from its actual HS code and origin documentation.
Do string lights and seasonal fairy lights fall under the same heading as a table lamp?
Decorative lighting sets, including string and fairy lights, are generally captured within heading 9405 as lighting fittings, so they typically share the fixture base duty rather than a bulb rate. That said, battery-powered or novelty sets can fall under a different subheading depending on construction, and the country-specific load still applies on top. Confirm the exact code per product, because seasonal SKUs are often imported in bulk and a small rate difference can add up at volume.
Are replacement lampshades and fixture parts dutied differently from a complete lamp?
Parts of lighting fittings, such as standalone shades, bases, and arms, have their own provisions within the 9405 structure and can carry a different rate than the finished fixture they belong to. If you import components and assemble or kit them domestically, you may be classifying the parts rather than the complete lamp, which can change the duty and sometimes the country-of-origin analysis. It is worth treating parts SKUs as their own line in your costing rather than assuming they inherit the finished-fixture rate, and confirming the code per SKU.
My fixtures ship with the bulbs included. Does that change the tariff?
It can. When a fixture and its light source are imported together as one packaged article, classification may turn on which part gives the item its essential character, and an integrated-LED fixture can be treated differently than a traditional lamp sold with a separate replaceable bulb. Because the bulb side may pull in a code outside the 9405 fixture heading, a bundled product can land at a different rate than the bare fixture would. Check the combined article's code rather than assuming it follows the fixture alone.
Is sourcing from the Philippines cheaper than China after tariffs?
Not automatically. The duty that applies depends on your product's exact HS code, so the only reliable comparison is the full landed cost per SKU — duty, unit cost, freight, and minimum order quantities — for the Philippines versus your current origin. Philippine factories can quote higher per-unit prices in categories where capacity is thin, which can offset any duty difference. Run the full landed-cost math per SKU before committing, and re-check it whenever rates move.
Does the Philippines qualify for any duty-free trade program with the US?
There is no comprehensive US free-trade agreement with the Philippines that zeroes out duties across the board, and any preference that does exist applies only if the goods meet that program's specific rules of origin. Reciprocal-era duties still apply to most imports. Don't assume a category is duty-free — confirm the HS code and the actual current treatment for your product, and treat program eligibility as something to verify rather than presume. This is general guidance, not customs or legal advice.
What's the biggest risk when moving sourcing to the Philippines?
Two things. First, origin integrity: tariff treatment follows where the product is substantially transformed, so components made elsewhere and only assembled or repacked in the Philippines may not earn Philippine origin — and can be reclassified to a higher-tariff country at the border. Second, supplier depth: outside the Philippines' established strengths you may face fewer vetted factories, longer lead times, and weaker pricing leverage. Vet the supply base for your exact product and keep clean origin documentation before you shift volume. This is general guidance, not customs or legal advice.
MarginGuard watches every imported SKU and alerts you the moment a tariff change pushes one below your target margin — with the exact recovery price.
Scan your store free →